Removable Flash Media Information

Removable flash media is a memory device. It is about the size of a postage stamp. The benefits of this card include a high data transfer rate and low battery consumption. It uses flash memory to provide non-volatile storage. This means that a power source is not required to retain stored data.

User Privileges

Selection View Manage
Removable Flash MediaUser, Power User, Administrator Power User, Administrator

Internal Dual SD Module Redundancy

Redundancy Indicates the health of the current redundant module. This is displayed as either Lost, Full, etc.
Full Indicates that data is mirrored. It indicates that a device may fail but the system remains functional.
Lost Indicates that the system is not redundant, and that an additional device failure will result in a system failure.

Internal SD Modules Status

Status Shows the health of the individual Internal SD module. It is indicated by the status icon for components. (OK) indicates that a component is healthy (OK). (noncritical) indicates that a component has a warning (noncritical) condition and requires prompt attention. (Critical) indicates that a component has a critical/failure condition and requires immediate attention. (unknown) indicates that the health status of an element is unknown.
Connector Name Displays the name of the SD module.
State Displays the state of the SD module. These are:
Boot This is a transitory state.
Active No errors have been detected on it during the Read-Write process.
Standby The card is receiving a copy of all secure digital reads.
Failed No I/O can be performed on this card.
Offline One or both of the following conditions apply: " At boot, CID signature is different from the stored value. " Card is the destination of a copy that is in progress.
Absent No secure digital media is detected.
Write-Protected After insertion, card is determined to be write-protected.
Not Available The status of the card is unknown.
Storage Size Displays the size of the SD module. If the size is less than one Gigabytes the size is reported in Megabytes.

vFlash Media Details

Connector Name Displays the vFlash media connector name.
Type Displays the type of SD card that is attached to the server. The possible values are:
vFlash SD Card The attached SD card is certified, and supports up to 16 vFlash partitions.
SD Card The attached SD card is not certified, and supports only one partition of size 256MB. This option is applicable only for yx1x systems and earlier.
Not Available SD card is either not detected, or not present.
State Displays the state of the vFlash media. The possible values are:
Present When vFlash media is detected.
Absent No secure digital media is detected.
Available Size Displays the unused space on the vFlash media.
Storage Size Displays the size of the SD module. If the size is less than one Gigabytes the size is reported in Megabytes.
For an explanation of other buttons present on Server Administrator Action pages, see Server Administrator Window Buttons.