# changelog

author: QLogic Build Environment
changelog:
  -Add RH5.10 support. 
  -Add RH6.5 support. 
  -FC-TAPE - Host responds early to a requested resend delay - Linux (70101)
  -SLES11 MEZ75 IO halt with Nexus reboot tests (70728)
  -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187)
  -KVM gso and gro are not working on hv and vm as expected (70506)
  -SRIOV mtu toggle failure (70530)
  -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531)
  -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426)
  -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263)
  -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427)
  -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690)
  -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627)
  -VFs are not getting created for QLogic adapters in RHEL5.10 OS. (71456)


author: QLogic Build Environment
changelog:
  -Added Linux SRIOV support
  -Added iSCSI & FCoE HBA support for specific HP adapters and devices
  -Added VC4.10 support
  -Added BCV support
  -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence.
  -Allow UDP tunneling offload
  -Enable IPGRE RSS by default
  -Support different GRE RSS modes.
  -Fixed bnx2x crash while reboot after SLES 11SP2 BFS installation (68472)


