/* $NetBSD: loadbsd.c,v 1.37.4.1 2023/06/03 15:04:06 martin Exp $ */ /* * Copyright (c) 1994 Michael L. Hitch * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Get definitions for boothowto */ #include "sys/reboot.h" #include "inttypes.h" #include "loadfile.h" #undef AOUT_LDPGSZ #define AOUT_LDPGSZ 8192 #undef sleep #define sleep(n) if (!t_flag) (void)Delay(50*n) /* * Version history: * 1.x Kernel startup interface version check. * 2.0 Added symbol table end address and symbol table support. * 2.1 03/23/94 - Round up end of fastram segment. * Check fastram segment size for minimum of 2M. * Use largest segment of highest priority if -p option. * Print out fastram size in KB if not a multiple of MB. * 2.2 03/24/94 - Zero out all unused registers. * Started version history comment. * 2.3 04/26/94 - Added -D option to enter debugger on boot. * 2.4 04/30/94 - Cpuid includes base machine type. * Also check if CPU is capable of running NetBSD. * 2.5 05/17/94 - Add check for "A3000 bonus". * 2.6 06/05/94 - Added -c option to override machine type. * 2.7 06/15/94 - Pass E clock frequency. * 2.8 06/22/94 - Fix supervisor stack usage. * 2.9 06/26/94 - Use PAL flag for E clock freq on pre 2.0 WB * Added AGA enable parameter * 2.10 12/22/94 - Use FindResident() & OpenResource() for machine * type detection. * Add -n flag & option for non-contiguous memory. * 01/28/95 - Corrected -n on usage & help messages. * 2.11 03/12/95 - Check kernel size against chip memory size. * 2.12 11/11/95 - Add -I option to inhibit synchronous transfer * 11/12/95 - New kernel startup interface version - to * support loading kernel image to fastmem rather than chipmem. * 2.13 04/15/96 - Direct load to fastmem. * Add -Z flag to force chipmem load. * Moved test mode exit to later - kernel image is created * and startup interface version checked in test mode. * Add -s flag for compatibility to bootblock loader. * 05/02/96 - Add a maximum startup interface version level * to allow future kernel compatibility. * 2.14 06/26/96 is - Add first version of kludges needed to * boot on DraCos. This can probably be done a bit more cleanly * using TTRs, but it works for now. * 2.15 07/28/96 is - Add first version of kludges needed to * get FusionForty kickrom'd memory back. Hope this doesn't * break anything else. * 2.16 07/08/00 - Added bootverbose support. * 01/15/03 - Plugged resource leaks. * Fixed printf() statements. * Ansified. * 3.0 01/16/03 - ELF support through loadfile() interface. * 3.1 07/10/11 - Added a serial console flag * 11/18/15 - (gnikl) Added detection of A600. * Fix handling of multiple -n options. * 3.2 09/02/22 - Make it compile with modern AmigaOS gcc ports. * 3.3 01/04/22 - Loading the kernel to the highest priority memory * segment is the default now. New option -l to revert to the * previous behaviour of largest segment. * New option -M to define a minimum size for the memory segment. */ static const char _version[] = "$VER: LoadBSD 3.3 (01.04.2023)"; /* * Kernel startup interface version * 1: first version of loadbsd * 2: needs esym location passed in a4 * 3: load kernel image into fastmem rather than chipmem * MAX: highest version with backward compatibility. */ #define KERNEL_STARTUP_VERSION 3 #define KERNEL_STARTUP_VERSION_MAX 9 #define DRACOREVISION (*(UBYTE *)0x02000009) #define DRACOMMUMARGIN 0x200000 #define MAXMEMSEG 16 struct boot_memlist { u_int m_nseg; /* num_mem; */ struct boot_memseg { u_int ms_start; u_int ms_size; u_short ms_attrib; short ms_pri; } m_seg[MAXMEMSEG]; }; struct boot_memlist memlist; struct boot_memlist *kmemlist; void err(int eval, const char *, ...); int getopt(int, char * const [], const char *); void get_mem_config (void **, u_long *, u_long *); void get_cpuid (void); void get_eclock (void); void get_AGA (void); void usage (void); void verbose_usage (void); extern void startit (void *, u_long, u_long, void *, u_long, u_long, int, void *, int, int, u_long, u_long, int); extern u_long startit_sz; extern char *optarg; extern int optind; struct ExpansionBase *ExpansionBase = NULL; struct GfxBase *GfxBase = NULL; u_int minmemsz = 2 * 1024 * 1024; int p_flag = 1; int k_flag; int t_flag; int reqmemsz; int S_flag; u_long I_flag; int Z_flag; u_long cpuid; long eclock_freq; long amiga_flags; char *program_name; u_char *kp; u_long kpsz; void exit_func(void) { if (kp) FreeMem(kp, kpsz); if (ExpansionBase) CloseLibrary((struct Library *)ExpansionBase); if (GfxBase) CloseLibrary((struct Library *)GfxBase); } int main(int argc, char **argv) { struct ConfigDev *cd, *kcd; u_long fmemsz, cmemsz, ksize, marks[MARK_MAX]; int boothowto, ncd, i, mem_ix, ch; u_short kvers; int *nkcd; u_char *fmem; char *esym; void (*start_it) (void *, u_long, u_long, void *, u_long, u_long, int, void *, int, int, u_long, u_long, int) = startit; char *kernel_name; atexit(exit_func); program_name = argv[0]; boothowto = RB_SINGLE; if (argc < 2) usage(); if ((GfxBase = (void *)OpenLibrary(GRAPHICSNAME, 0)) == NULL) err(20, "can't open graphics library"); if ((ExpansionBase=(void *)OpenLibrary(EXPANSIONNAME, 0)) == NULL) err(20, "can't open expansion library"); while ((ch = getopt(argc, argv, "aAbCc:DhI:klm:M:n:qptsSvVZ")) != -1) { switch (ch) { case 'k': k_flag = 1; break; case 'a': boothowto &= ~(RB_SINGLE); boothowto |= RB_AUTOBOOT; break; case 'b': boothowto |= RB_ASKNAME; break; case 'p': p_flag = 1; break; case 'l': p_flag = 0; break; case 't': t_flag = 1; break; case 'm': reqmemsz = atoi(optarg) * 1024; break; case 'M': minmemsz = atoi(optarg) * 1024 * 1024; break; case 's': boothowto &= ~(RB_AUTOBOOT); boothowto |= RB_SINGLE; break; case 'q': boothowto |= AB_QUIET; break; case 'v': boothowto |= AB_VERBOSE; break; case 'V': fprintf(stderr,"%s\n",_version + 6); break; case 'S': S_flag = 1; break; case 'D': boothowto |= RB_KDB; break; case 'c': cpuid = atoi(optarg) << 16; break; case 'A': amiga_flags |= 1; break; case 'n': i = atoi(optarg); if (i >= 0 && i <= 3) { amiga_flags &= ~(3 << 1); amiga_flags |= i << 1; } else err(20, "-n option must be 0, 1, 2, or 3"); break; case 'C': amiga_flags |= (1 << 3); break; case 'I': I_flag = strtoul(optarg, NULL, 16); break; case 'Z': Z_flag = 1; break; case 'h': verbose_usage(); default: usage(); } } argc -= optind; argv += optind; if (argc != 1) usage(); kernel_name = argv[0]; for (cd = 0, ncd = 0; cd = FindConfigDev(cd, -1, -1); ncd++) ; get_cpuid(); get_mem_config((void **)&fmem, &fmemsz, &cmemsz); get_eclock(); get_AGA(); /* * XXX Call loadfile with COUNT* options to get size * XXX Allocate memory for kernel + additional data * XXX Call loadfile with LOAD* options to load text/data/symbols */ marks[MARK_START] = 0; if (loadfile(kernel_name, marks, COUNT_TEXT|COUNT_TEXTA|COUNT_DATA|COUNT_BSS| (S_flag ? (COUNT_SYM|COUNT_HDR) : 0)) == -1) { err(20, "unable to parse kernel image"); } ksize = ((marks[MARK_END] + 3) & ~3) + sizeof(*nkcd) + ncd * sizeof(*cd) + sizeof(*nkcd) + memlist.m_nseg * sizeof(struct boot_memseg); if (t_flag) { for (i = 0; i < memlist.m_nseg; ++i) { printf("mem segment %d: start=%08x size=%08x" " attribute=%04x pri=%d\n", i + 1, memlist.m_seg[i].ms_start, memlist.m_seg[i].ms_size, memlist.m_seg[i].ms_attrib, memlist.m_seg[i].ms_pri); } printf("kernel size: %lu\n", ksize); } kpsz = ksize + 256 + startit_sz; kp = (u_char *)AllocMem(kpsz, MEMF_FAST|MEMF_REVERSE); if (kp == NULL) err(20, "failed alloc %d", ksize); marks[MARK_START] = (u_long)kp; if (loadfile(kernel_name, marks, LOAD_TEXT|LOAD_TEXTA|LOAD_DATA|LOAD_BSS| (S_flag ? (LOAD_SYM|LOAD_HDR) : 0)) == -1) { err(20, "unable to load kernel image"); } marks[MARK_END] = (marks[MARK_END] + 3) & ~3; if (k_flag) { fmem += 4 * 1024 * 1024; fmemsz -= 4 * 1024 * 1024; } if (reqmemsz && reqmemsz <= fmemsz) fmemsz = reqmemsz; if (boothowto & RB_AUTOBOOT) printf("Autobooting..."); if (boothowto & RB_ASKNAME) printf("Askboot..."); printf("Using %lu%c FASTMEM at 0x%lx, %luM CHIPMEM\n", (fmemsz & 0xfffff) ? fmemsz >> 10 : fmemsz >> 20, (fmemsz & 0xfffff) ? 'K' : 'M', (u_long)fmem, cmemsz >> 20); kvers = *(u_short *)(marks[MARK_ENTRY] - 2); if (kvers == 0x4e73) kvers = 0; if (kvers > KERNEL_STARTUP_VERSION_MAX) err(20, "newer loadbsd required: %d\n", kvers); if (kvers > KERNEL_STARTUP_VERSION) { printf("****************************************************\n" "*** Notice: this kernel has features which require\n" "*** a newer version of loadbsd. To allow the use of\n" "*** any newer features or capabilities, you should\n" "*** update to a newer version of loadbsd\n" "****************************************************\n"); sleep(3); /* even more time to see that message */ } /* * give them a chance to read the information... */ sleep(2); nkcd = (int *)marks[MARK_END]; esym = 0; /* * If symbols loaded and kernel can handle them, set esym to end. */ if (marks[MARK_SYM] != marks[MARK_START]) { if (kvers > 1) { esym = (void *)(marks[MARK_END] - marks[MARK_START]); } else { /* * suppress symbols */ nkcd = (int *)marks[MARK_SYM]; } } *nkcd = ncd; kcd = (struct ConfigDev *)(nkcd + 1); while((cd = FindConfigDev(cd, -1, -1))) { u_char *ba = kcd->cd_BoardAddr; memcpy(kcd, cd, sizeof(*kcd)); if (((cpuid >> 24) == 0x7d) && ((u_long)ba < 0x1000000)) { if (t_flag) printf("Transformed Z2 device from %08lx ", (u_long)ba); ba += 0x3000000; kcd->cd_BoardAddr = ba; if (t_flag) printf("to %08lx\n", (u_long)ba); } ++kcd; } kmemlist = (struct boot_memlist *)kcd; kmemlist->m_nseg = memlist.m_nseg; for (mem_ix = 0; mem_ix < memlist.m_nseg; mem_ix++) kmemlist->m_seg[mem_ix] = memlist.m_seg[mem_ix]; if (kvers > 2 && Z_flag == 0) { /* * Kernel supports direct load to fastmem, and the -Z * option was not specified. Copy startup code to end * of kernel image and set start_it. */ if (ksize >= fmemsz) { printf("Kernel size %lu exceeds best Fast Memory segment of %lu\n", ksize, fmemsz); err(20, "Insufficient Fast Memory for kernel"); } if (kp < fmem) { printf("Kernel at %08lx, Fastmem used at %08lx\n", (u_long)kp, (u_long)fmem); err(20, "Can't copy upwards yet.\nDefragment your memory and try again OR try the -p OR try the -Z options."); } start_it = (void (*)())(kp + ksize + 256); memcpy((void *)start_it, (void *)startit, startit_sz); CacheClearU(); printf("*** Loading from %08lx to Fastmem %08lx ***\n", (u_long)kp, (u_long)fmem); sleep(2); } else { /* * Either the kernel doesn't support loading directly to * fastmem or the -Z flag was given. Verify kernel image * fits into chipmem. */ if (ksize >= cmemsz) { printf("Kernel size %lu exceeds Chip Memory of %lu\n", ksize, cmemsz); err(20, "Insufficient Chip Memory for kernel"); } Z_flag = 1; printf("*** Loading from %08lx to Chipmem ***\n", (u_long)kp); } /* * if test option set, done */ if (t_flag) { exit(0); } /* * XXX AGA startup - may need more */ LoadView(NULL); /* Don't do this if AGA active? */ start_it(kp, ksize, marks[MARK_ENTRY] - marks[MARK_START], fmem, fmemsz, cmemsz, boothowto, esym, cpuid, eclock_freq, amiga_flags, I_flag, Z_flag == 0); /*NOTREACHED*/ } void get_mem_config(void **fmem, u_long *fmemsz, u_long *cmemsz) { struct MemHeader *mh, *nmh; u_int nmem, eseg, segsz, seg, nseg, nsegsz; char mempri; nmem = 0; mempri = -128; *fmemsz = 0; *cmemsz = 0; *fmem = NULL; /* * walk through the exec memory list */ Forbid(); for (mh = (void *) SysBase->MemList.lh_Head; nmh = (void *) mh->mh_Node.ln_Succ; mh = nmh) { nseg = (u_int)mh->mh_Lower; nsegsz = (u_int)mh->mh_Upper - nseg; segsz = nsegsz; seg = (u_int)CachePreDMA((APTR)nseg, (LONG *)&segsz, 0L); nsegsz -= segsz, nseg += segsz; for (;segsz; segsz = nsegsz, seg = (u_int)CachePreDMA((APTR)nseg, (LONG *)&segsz, DMA_Continue), nsegsz -= segsz, nseg += segsz, ++nmem) { if (t_flag) printf("Translated %08x sz %08x to %08x sz %08x\n", nseg - segsz, nsegsz + segsz, seg, segsz); eseg = seg + segsz; if ((cpuid >> 24) == 0x7D) { /* DraCo MMU table kludge */ segsz = ((segsz -1) | 0xfffff) + 1; seg = eseg - segsz; /* * Only use first SIMM to boot; we know it is VA==PA. * Enter into table and continue. Yes, * this is ugly. */ if (seg != 0x40000000) { memlist.m_seg[nmem].ms_attrib = mh->mh_Attributes; memlist.m_seg[nmem].ms_pri = mh->mh_Node.ln_Pri; memlist.m_seg[nmem].ms_size = segsz; memlist.m_seg[nmem].ms_start = seg; ++nmem; continue; } memlist.m_seg[nmem].ms_attrib = mh->mh_Attributes; memlist.m_seg[nmem].ms_pri = mh->mh_Node.ln_Pri; memlist.m_seg[nmem].ms_size = DRACOMMUMARGIN; memlist.m_seg[nmem].ms_start = seg; ++nmem; seg += DRACOMMUMARGIN; segsz -= DRACOMMUMARGIN; } memlist.m_seg[nmem].ms_attrib = mh->mh_Attributes; memlist.m_seg[nmem].ms_pri = mh->mh_Node.ln_Pri; memlist.m_seg[nmem].ms_size = segsz; memlist.m_seg[nmem].ms_start = seg; if ((mh->mh_Attributes & (MEMF_CHIP|MEMF_FAST)) == MEMF_CHIP) { /* * there should hardly be more than one entry for * chip mem, but handle it the same nevertheless * cmem always starts at 0, so include vector area */ memlist.m_seg[nmem].ms_start = seg = 0; /* * round to multiple of 512K */ segsz = (segsz + 512 * 1024 - 1) & -(512 * 1024); memlist.m_seg[nmem].ms_size = segsz; if (segsz > *cmemsz) *cmemsz = segsz; continue; } /* * some heuristics.. */ seg &= -AOUT_LDPGSZ; eseg = (eseg + AOUT_LDPGSZ - 1) & -AOUT_LDPGSZ; /* * get the mem back stolen by incore kickstart on * A3000 with V36 bootrom. */ if (eseg == 0x07f80000) eseg = 0x08000000; /* * or by zkick on a A2000. */ if (seg == 0x280000 && strcmp(mh->mh_Node.ln_Name, "zkick memory") == 0) seg = 0x200000; /* * or by Fusion Forty fastrom */ if ((seg & ~(1024*1024-1)) == 0x11000000) { /* * XXX we should test the name. * Unfortunately, the memory is just called * "32 bit memory" which isn't very specific. */ seg = 0x11000000; } segsz = eseg - seg; memlist.m_seg[nmem].ms_start = seg; memlist.m_seg[nmem].ms_size = segsz; /* * If this segment is smaller than minmemsz (default: 2M), * don't use it to load the kernel */ if (segsz < minmemsz) continue; /* * if p_flag is set, select memory by priority * instead of size */ if ((!p_flag && segsz > *fmemsz) || (p_flag && mempri <= mh->mh_Node.ln_Pri && segsz > *fmemsz)) { *fmemsz = segsz; *fmem = (void *)seg; mempri = mh->mh_Node.ln_Pri; } } } memlist.m_nseg = nmem; Permit(); } /* * Try to determine the machine ID by searching the resident module list * for modules only present on specific machines. (Thanks, Bill!) */ void get_cpuid(void) { cpuid |= SysBase->AttnFlags; /* get FPU and CPU flags */ if ((cpuid & AFB_68020) == 0) err(20, "CPU not supported"); if (cpuid & 0xffff0000) { if ((cpuid >> 24) == 0x7D) return; switch (cpuid >> 16) { case 500: case 600: case 1000: case 1200: case 2000: case 3000: case 4000: return; default: printf("machine Amiga %lu is not recognized\n", cpuid >> 16); exit(1); } } if (FindResident("A4000 Bonus") || FindResident("A4000 bonus") || FindResident("A1000 Bonus")) cpuid |= 4000 << 16; else if (FindResident("A3000 Bonus") || FindResident("A3000 bonus")) cpuid |= 3000 << 16; else if (OpenResource("card.resource")) { UBYTE alicerev = *((UBYTE *)0xdff004) & 0x6f; if (alicerev == 0x22 || alicerev == 0x23) cpuid |= 1200 << 16; /* AGA + PCMCIA = A1200 */ else cpuid |= 600 << 16; /* noAGA + PCMCIA = A600 */ } else if (OpenResource("draco.resource")) { cpuid |= (32000 | DRACOREVISION) << 16; } /* * Nothing found, it's probably an A2000 or A500 */ if ((cpuid >> 16) == 0) cpuid |= 2000 << 16; } void get_eclock(void) { /* Fix for 1.3 startups? */ if (SysBase->LibNode.lib_Version > 36) eclock_freq = SysBase->ex_EClockFrequency; else eclock_freq = (GfxBase->DisplayFlags & PAL) ? 709379 : 715909; } void get_AGA(void) { /* * Determine if an AGA mode is active */ } void usage(void) { fprintf(stderr, "usage: %s [-abhklpstACDSVZ] [-c machine] [-m size] [-M size] [-n mode] [-I sync-inhibit] kernel\n", program_name); exit(1); } void verbose_usage(void) { fprintf(stderr, "\n\ NAME\n\ \t%s - loads NetBSD from amiga dos.\n\ SYNOPSIS\n\ \t%s [-abhklpstACDSVZ] [-c machine] [-m size] [-M size] [-n mode] [-I sync-inhibit] kernel\n\ OPTIONS\n\ \t-a Boot up to multiuser mode.\n\ \t-A Use AGA display mode, if available.\n\ \t-b Ask for which root device.\n\ \t It is possible to have multiple roots and choose between them.\n\ \t-c Set machine type. [e.g 3000; use 32000+N for DraCo rev. N]\n\ \t-C Use Serial Console.\n\ \t-D Enter debugger\n\ \t-h This help message.\n\ \t-I Inhibit sync negotiation. Option value is bit-encoded targets.\n\ \t-k Reserve the first 4M of fast mem [Some one else\n\ \t is going to have to answer what that it is used for].\n\ \t-l Use the largest memory segment for loading the kernel.\n\ \t-m Tweak amount of available memory, for finding minimum amount\n\ \t of memory required to run. Sets fastmem size to specified\n\ \t size in Kbytes.\n\ \t-M Request a minimum size in Mbytes for the kernel's memory\n\ \t segment. Defaults to 2M.\n\ \t-n Enable multiple non-contiguous memory: value = 0 (disabled),\n\ \t 1 (two segments), 2 (all avail segments), 3 (same as 2?).\n\ \t-p Use highest priority fastmem segment for loading the kernel.\n\ \t This is the default.\n\ \t-q Boot up in quiet mode.\n\ \t-s Boot up in singleuser mode (default).\n\ \t-S Include kernel symbol table.\n\ \t-t This is a *test* option. It prints out the memory\n\ \t list information being passed to the kernel and also\n\ \t exits without actually starting NetBSD.\n\ \t-v Boot up in verbose mode.\n\ \t-V Version of loadbsd program.\n\ \t-Z Force kernel load to chipmem.\n\ HISTORY\n\ \tThis version supports Kernel version 720 +\n", program_name, program_name); exit(1); } static void _Vdomessage(int doerrno, const char *fmt, va_list args) { fprintf(stderr, "%s: ", program_name); if (fmt) { vfprintf(stderr, fmt, args); fprintf(stderr, ": "); } if (doerrno) { fprintf(stderr, "%s", strerror(errno)); } fprintf(stderr, "\n"); } void err(int eval, const char *fmt, ...) { va_list ap; va_start(ap, fmt); _Vdomessage(1, fmt, ap); va_end(ap); exit(eval); } void warn(const char *fmt, ...) { va_list ap; va_start(ap, fmt); _Vdomessage(1, fmt, ap); va_end(ap); }